diff --git a/src/routes/feed/electronics/nintendo-repairs.md b/src/routes/feed/electronics/nintendo-repairs.md
index e6407a2..d187247 100644
--- a/src/routes/feed/electronics/nintendo-repairs.md
+++ b/src/routes/feed/electronics/nintendo-repairs.md
@@ -31,4 +31,4 @@ I ordered a replacement cable and tackled the most challenging task imaginable w
 
 The 3DS works again!! It's been 8 years since it last booted!! I unfortunately don't have its SD card anymore, so the data is gone, but the system works! Truly a miracle.
 
-Only thing left to do now is to fix the [USB-C port on my New 3DS](/projects/electronics/3ds-usb-c/)... it stopped accepting C-to-C connections, although A-to-C still works. Probably just need to re-seat or replace the 5.1kΩ resistor.
\ No newline at end of file
+Only thing left to do now is to fix the [USB-C port on my New 3DS](/projects/electronics/3ds-usb-c/)... it stopped accepting C-to-C connections, although A-to-C still works. Probably just need to resolder or replace the 5.1kΩ resistor.
\ No newline at end of file
diff --git a/src/routes/projects/electronics/deej0461.md b/src/routes/projects/electronics/deej0461.md
index bfc3257..fb1e3dd 100644
--- a/src/routes/projects/electronics/deej0461.md
+++ b/src/routes/projects/electronics/deej0461.md
@@ -24,22 +24,32 @@ Software-wise, I set this up with the original deej software to control main vol
         {
             src: "prototype.webp",
             alt: "An Arduino Pro Micro with a white LED attached to it. The LED is glowing.",
-            desc: ["initial prototype to test LED functionality"],
+            desc: [
+                "I initially tested whether I could get the Arduino to light up an LED. I wanted to include LEDs because I thought I could later integrate them in a cool way, but the device ended up being so simple, there wasn't really a need for much visual feedback.",
+            ],
         },
         {
             src: "soldering.webp",
             alt: "An Arduino with keyboard switches, LEDs, and a slider wired into it. The components are connected with relatively long cables.",
-            desc: ["it may look like a prototype, but these are the production-ready innards of the machine!"],
+            desc: [
+                "It may look like a prototype, but these are the production-ready innards of the machine! Trying to put this into the 3D printed shell without breaking any of the frail soldering joints was a pain, especially as the key switches really weren't meant for soldering and thus barely hold on to the wires.",
+            ],
         },
         {
             src: "printing.webp",
             alt: "A Bambu Lab A1 mini 3D printer in the middle of printing casing parts using a golden filament. The printer head has two googly eyes attached.",
-            desc: ["googly-eyed printer hard at work"],
+            desc: [
+                "googly-eyed printer hard at work.",
+                "I'm using Bambu Lab PLA Metal 'Iridium Gold Metallic (13400)' for the body here.",
+            ],
         },
         {
             src: "assembly.webp",
             alt: "An Arduino set into a 3D printed case with a slider, two LEDs, and four key switches soldered to it using wires. The components are spread out and hanging out the top of the case.",
-            desc: ["no PCB? no problem"],
+            desc: [
+                "A visual guide to the (mental) pain I had to endure assembling this thing. Creating a simple PCB would have been MUCH better, but it would have meant designing one in KiCad, paying for at least 5 of them at a supplier, waiting for them to ship, etc. ...",
+                "Safe to say, I wasn't willing to do any of that. Quick and cheap was my preferred method here.",
+            ],
         },
     ]}
 />