updated readme once more

2025-05-10 20:27:08 +02:00
parent 5a9c1801b3
commit 7d9dfa0e6f
1 changed files with 1 additions and 2 deletions
@@ -12,14 +12,13 @@ The linked parts are only references; feel free to use any compatible hardware o
 ## Diagram
 ![A diagram showing how to connect a PS2 controller female connector and peripherals to an Arduino Pro Micro](pinout.webp)
 ## Note on Flashing
-Flashing the XInput library makes the Arduino unresponsive to further flashing.
+Flashing the XInput library makes the Arduino unresponsive to further flashing. In order to flash new sketches, you'll need to manually reset the board. You'll need to perform steps 4-6 on every flash as long as you have the Arduino configured for XInput. Find more information about this [in the readme of the Arduino XInput library](https://github.com/dmadison/ArduinoXInput_AVR?tab=readme-ov-file#upload-warning-and-instructions).
 1. Wire a switch between GND and RST to act as a reset switch
 2. Enable verbose output on upload in `Arduino IDE -> File -> Preferences`
 3. Select the COM port of the board and the corresponding board type as provided by the XInput library. For me, this was `Arduino Leonardo w/ XInput`
 4. Press "Upload"
 5. Once the notification in the bottom right says "Uploading", press the reset switch twice in quick succession
 6. On success, the output window should print out data, concluding with "avrdude done. thank you."
-You'll need to perform steps 4-6 on every flash as long as you have the Arduino configured for XInput. Find more information about this [in the readme of the Arduino XInput library](https://github.com/dmadison/ArduinoXInput_AVR?tab=readme-ov-file#upload-warning-and-instructions).
 ## Required Libraries
 - [PS2X library](https://github.com/madsci1016/Arduino-PS2X) for interpreting the controller's signals
 - [ArduinoXInput_AVR library](https://github.com/dmadison/ArduinoXInput_AVR) for sending XInput commands via an Arduino Pro Micro